Humidifying Heating and Cooling Unit

Applications: ideal for high and large space (H: 4-30m) that needs cooling, heating and humidifying. Temperature and humidifying capacity can be auto controlled by using wireless temp & humidity monitor.

Model: AirTS-HK-I, AirTS-HK-II

Function: cooling, heating, humidifying

Cold and hot source: cold water (7-12℃)/hot water (40-90℃)

Control mode: wireless control, variable frequency, auto monitoring

Quality Assurance

Stable and Durable.

After-sales Service

24H Online.

Inquire Now Next Product

Working Principle Specification Application Download Inquire Now

Working Principle

When hot/cold water or stream passes the equipment, the efficient heat exchanger in the equipment is used to achieve rapid heating/cooling of the air.

The large wind pressure axial flow fan installed on the top is used to forcedly press the hot/cold air down. Then the air is subject to pressure boost twice through the silencer sponge and the lower trapezoidal convergence, swirls out from the nozzle through the guide vane and is distributed throughout the space from top to down.

Features

By adjusting wind speed and air outlet angle, it achieves comfortable cooling or heating environment

Supply air angle stepless regulation

Utilize axial fan to efficiently recover heat from the top, reducing heat loss from the roof, achieving energy-saving effects

The fan is installed below the air exchanger to control noise level (<60 dB)

The special designed square-shaped type air exchanger prevent the leakage of condensate water

The complex designed air exchanger, 1.5 times exchange area than others, takes significant heating efficiency

Long air supply distance, high hot/cold air volume

4 sides return air structure, installed on the roof, require smaller installation space

Humidifying: achieve by a high pressure misting nozzle and require the use of a water softening system

Function: cooling, heating, humidifying

Functions

Fall prevention warning monitoring

Working data collection and analysis

Variable air volume and water volume

Wireless intelligent control

Filter net self-cleaning

Frost protection

Humidifying function

Support full linkage control

AirTS top unit

High and large space air conditioner lifted on the roof

It achieves hot/cold air from the air exchanger in the equipment

It distributes the hot/cold air by means of efficient air distributor, which eliminates the undesirable indoor temp layers

Comfortable cooling or heating environment without wind feeling sense

Specification

Humidifying Heating and Cooling Unit

Humidifying Heating and Cooling Unit
Model		AirTS-HK-I	AirTS-HK-II
Rotating speed of fan	r/min	0～900	0～860
Standard circulating air volume	m³/h	0～6900	0～10100
Voltage	V	380±5%	380±5%
Electric power	kW	0~0.85	0~1.80
Current	A	0~1.65	0~3.60
Suitable installation height	m	4~15	4~23
Humidifying mode		High pressure misting nozzle	High pressure misting nozzle
Humidifying medium		Distilled water/low-impurity water	Distilled water/low-impurity water
Standard spray flow	kg/h	20	20
Nozzle working pressure	Mpa	5~7	5~7
Control mode		VAV stepless regulation	VAV stepless regulation
Noise	dB	<60	<60
Remarks: A single unit of equipment is standard configured with 4 nozzles and the maximum spray flow of a single nozzle is 5kg/h. To increase the humidification amount, the nozzles shall be increased, but the number of the nozzles in a single unit of equipment shall not exceed 6; otherwise, below the equipment air port is of excessive humidity and poor comfort

Humidifying Heating and Cooling Unit

Dimension
Model		AirTS-HK-I	AirTS-HK-II
A	mm	900	1100
B	mm	1250	1440
C	mm	735	920
E	mm	100	100
F	mm	95	95
G	mm	480	568
H	mm	765	935
J	mm	660	789
K	mm	890	1032
L	mm	1050	1292
M (internal thread)	mm	DN40	DN50
N (external thread)	mm	DN25	DN32
Weight	kg	154	237
Water volume	L	10	13.2

Application

Download

High and large space air conditioner catalogue

Download